rWeb Serial Commands

Connecting the Console (Physical rWeb)

Set up a terminal program (such as HyperTerminal or TeraTerm) with the following configuration:

• Baud rate: 115200 baud
• Data bits: 8 bits
• Parity: No parity
• Stop bit: 1 stop bit
• Flow Control: None
• Hardware Handshake: None

Connect your computer to the console port of the device using a DB9 serial cable. Make sure the connector is firmly seated and the thumbscrews are tightened.

Your terminal program should now be connected to the device. Hit enter to bring up the console prompt. The available commands are:

command       description
=========================================================
help                 display this message
status               display the current system configuration
show_ip              display the current IP address
reset_ip             reset interface and network parameters
reset_pw             reset user 'admin' with password 'admin123'
set_mgmt_ip          update management interface
hostname             update system hostname
dns_servers          update the list of dns servers used
dns_domain           update the default dns search domain
maintenance_override toggle temporary maintenance password
erase_all_data       erases all the data and resets rWeb
reboot               reboots rWeb
shutdown             shuts down rWeb

Type 'help [command]' for more details on the command.