Skip to main content
Version: 10.0

Device Configuration and Management

These pages explain how to add and configure other RioRey filter devices within rWeb. When clicking Administration->Devices, you are brought directly to an administration page.

Devices running RIOS must have a management connection to an rWeb Server. Before installing your device, please make sure you have properly configured rWeb and have all of its relevant network information handy (IP address and net mask). In addition, you will need to make sure the following ports are unblocked, or the filter device will not start correctly:

  • UDP Destination Port 123 (NTP)- This is required for synching operations between the rWeb and filter device. By default, the filter device talks to two RioRey NTP Servers at 65.216.233.249 and 194.58.204.148 (this can be changed).
  • UDP Destination Port 61166 (Flow Sampling and Control)- This is how the rWeb and filter device monitor traffic and collect data.
  • UDP/TCP Destination Port 61167 (Filter List Data Exchange)- This is how rWeb and the filter device exchange information on IPs blocked by Clear Filter List (RIOS 5.6.0 or greater).
  • TCP Destination Port 8022 (Management Control)- This is how rWeb issues commands to the filter device.